成人播放-成人不卡-成人的天堂视频一区二区三区-成人观看-欧美色精品天天在线观看视频-欧美色欧美

Quanzhou Quanzhou wind turbine testing technology center is the companys own set of scientific research, testing engineering technology testing center, advanced equipment, is the first domestic private enterprise fan testing technology center. The center, together with Fuzhou University, Huaqiao University and Fujian Provincial Center Inspection Institute, is a technical center that can serve many wind turbine enterprises. The main detection items include: air volume test, noise detection, high temperature detection, low temperature detection, constant temperature detection, constant humidity test, salt spray test, dynamic balance test, drop impact test, vibration impact test, coaxiality test, concentricity test, balance degree test, load test, inter turn withstand voltage test, voltage detection, frequency detection and current detection Dozens of testing equipment, such as testing, power testing, power factor testing, withstand voltage testing and aging testing, can fully meet the requirements of various rotating parts such as axial flow fan, centrifugal fan and cross flow fan. Welcome people from all walks of life to visit and guide.

Drop tester

The equipment can test the anti vibration strength of the product after falling from a height. Place the product at a height of 1 meter and then make it fall freely. Then test whether the strength of the product shell and the fastening degree of the internal structure of the motor change.

High low temperature constant humidity testing machine

This equipment is suitable for the performance reliability test of fans and industrial electronic products, with a large temperature control range, and the performance indexes all meet the requirements of GB 10592-93 "technical conditions for high and low temperature test chambers", and GB 10586-93 "technical conditions for damp heat test chambers", and is applicable to gb2423-93 "basic environmental test procedures for electrical and electronic products" and "low temperature a: test method; high temperature test" B: Test Method "and constant and alternating damp heat tests can effectively carry out high and low temperature and damp heat tests on products.

1. The temperature control range is - 70 ℃ - 150 ℃ (adjustable);

2. Humidity regulation range: 30% - 98% R.H (temperature 30 ℃ - 85 ℃);

3. Refrigeration mode: Double cascade compression refrigeration (air cooling);

4. Temperature and humidity fluctuation: ≤± 0.5 ℃, ≤± 2% R.H;

5. Temperature and humidity uniformity: ≤± 2 ℃, ≤± 2% R.H;

Vibration test equipment

  The equipment can simulate various vibration and shock tests in the process of vehicle transportation and handling. The maximum amplitude is 5mm (sine wave), the maximum acceleration is 20g, the frequency range is 1-400hz, and the time control is 315 × 105 s.

 

Dynamic balance testing machine

This equipment adopts the national gb7662-87 standard, which can be used to detect the vibration of rotating parts of rotating machinery, such as motor, fan, blower, etc. It is mainly applicable to: flywheel, fan, impeller and other parts for positive balance, with magnetoelectric speed sensor as the electromechanical energy exchange structure, which is more in line with the force measuring principle of balancing machine. The measuring system adopts computer and international general digital and analog integrated circuit. The speed, value and phase are all displayed by digital. After starting, the unbalance value and its phase can be displayed correctly, and the memory display can be realized. With the correction device, the unbalance can be removed. The operation is simple, convenient and efficient.

 

Salt spray testing machine

  The equipment adopts iec68-2-11 standard, conforms to gb2421, gb2422, gb2424.10 national standards, and meets the requirements of iso-376837693770, astm-b117, b268, jis-d0201, h8502, h8610, K5400 and CNS standards. The corrosion resistance of the products was tested after the surface of various materials was treated with paint, coating, electroplating anode treatment, rust prevention and insulation. Temperature range: room temperature + 5 ℃ - 55 ℃ humidity range: 85-95% salt spray deposition: 1-2 ㏕ 80 cm2. H.

Air volume detection equipment

  The equipment is designed according to the requirements of GB / t2658-1995, GB / t1236-2000, GB / t7725-96, jis-8330, amca210-85, ashrae51-75 and iso5801-1996. It can measure the air pressure and air volume of various axial-flow fans, cross-flow fans, centrifugal fans and other products, and conduct intelligent testing and drawing of all-round performance curves. The air volume test range is 0.1-50m3/min, the wind pressure test range is 0-1000pa, and the rotation speed is 0-3000rpm.

Noise detection equipment

The noise tester is a multifunctional, portable and precise noise measurement and spectrum analysis instrument. The instrument adopts modular design and can be configured with different hardware and software modules. It is suitable for various industrial noise measurement, spectrum analysis and reverberation time measurement. The instrument adopts digital detection technology and switched capacitor filter technology, with high precision, good stability, and high stability High reliability. The display adopts 128 × 64 lattice liquid crystal display and menu operation interface.

 

Search

主站蜘蛛池模板: 篠田优被公侵犯电影| 欧美日韩大片在线观看| 小情侣高清国产在线播放| 毛片在线高清免费观看| 新木乃伊电影免费观看完整版| 一区在线观看| 再深点灬舒服灬太大了爽| 好男人社区神马在线观看www| 故意打开双腿让翁公看| 嫩草影院免费观看| 国产精品99| 2019天天干夜夜操| 亚洲欧美另类日韩| 好骚导航| 翁止熄痒禁伦短文合集免费视频| 国产在线精品一区二区中文| 狍和女人一级毛片免费的| 国产gay小鲜肉| 美女扒开胸罩露出奶了无遮挡免费 | 久久免费动漫品精老司机| 午夜性色一区二区三区不卡视频| 欧美a级影院| 欧美xxx高清| 免费阿v| 吃奶摸下激烈视频无遮挡| 黄色搞基网站| 91caoprom| 黄色一级大片| 影音色资源| 里番肉片h排行榜| 女大学生沙龙室3| 无遮挡动漫画在线观看| 欧美亚洲一区二区三区| 久久精品一区二区三区中文字幕| 国产激情久久久久影院小草| 亚洲综合久久综合激情久久| 精品国产一区二区三区免费| 古装一级淫片a免费播放口| 一级毛片免费观看不收费| 天天操天天干天天干| aaa毛片免费观看|